## BladeX启动
1. 配置blade-report工程的数据源，默认与主工程一致
 ![](../../images/screenshot_1597468023434.png)
2. 启动ReportApplication
![](../../images/screenshot_1597468061432.png)
3. 看到如下日志则说明启动成功
![](../../images/screenshot_1597468122994.png)
4. 访问:[http://localhost:8108/ureport/designer](http://localhost:8108/ureport/designer)，若看到如下界面则说明启动成功
![](../../images/screenshot_1597468188783.png)




## BladeX-Boot启动
1. 开启报表配置
![](../../images/screenshot_1597468281743.png)
2. 启动Application
![](../../images/screenshot_1597468375654.png)
3. 看到如下日志则说明启动成功
![](../../images/screenshot_1597468338804.png)
4. 访问:[http://localhost/ureport/designer](http://localhost/ureport/designer)，若看到如下界面则说明启动成功
![](../../images/screenshot_1597468393413.png)




## 前端启动
1. 修改website.js的reportUrl值，注意两个版本的端口号
![](../../images/screenshot_1597542278063.png)




## 菜单配置
1. 修改报表配置和报表公告两个菜单的地址，注意两个版本的端口号
![](../../images/screenshot_1597543021764.png)
2. 刷新界面，访问报表配置，如果显示了界面则表示配置成功
![](../../images/screenshot_1597543092830.png)
![](../../images/screenshot_1597543108937.png)